Apricot kernel oil in soap making
Published by The Soap Brain Team
Apricot kernel oil is a conditioning soap-making oil rich in oleic acid (68%). A gram of it turns to soap with about 0.135 g of NaOH (lye). It makes a mild, gentle bar and pairs well with a harder, cleansing oil. Most soapers use it at 5–12% of their oils.
Fatty-acid profile
Apricot kernel oil is a gentle, conditioning oil, mostly unsaturated fatty acids that leave a mild, moisturising bar with a softer, lower lather. It pairs naturally with a harder, more cleansing oil to firm the bar up and add bubbles. Because its polyunsaturated (linoleic/linolenic) share is on the higher side, watch the total across the whole recipe and consider a modest antioxidant to guard against rancidity and DOS.
Apricot kernel oil is about 5% saturated fat and 90% unsaturated — that unsaturated majority is what makes it conditioning and slower to trace, but softer on its own.
| Fatty acid | Share | What it does in soap |
|---|---|---|
| Oleic acid | 68% | a monounsaturated fatty acid that makes a gentle, conditioning, moisturising bar with a slick, lower lather and a slower trace |
| Linoleic acid | 22% | a polyunsaturated fatty acid that is very conditioning but oxidises readily — a driver of DOS (dreaded orange spots) at high levels |
| Palmitic acid | 5% | a saturated fatty acid that builds a hard, long-lasting bar with a stable, creamy lather |
Apricot kernel oil in the bar
Apricot kernel oil gives a mild, low, slick lather on its own. Blended with a bubbly, cleansing oil it contributes body and mildness while the partner oil supplies the bubbles.
High-oleic Apricot kernel oil traces slowly, which gives you comfortable working time for swirls and layers. In exchange the bar is soft at first and rewards a longer cure — four to eight weeks — to harden fully and last in the shower.
In a blend Apricot kernel oil is the conditioning, skin-feel component and can often make up the bulk of the oils. Add a firmer, more cleansing oil — coconut, palm or a hard butter — to bring hardness and bubbles the finished bar would otherwise miss.
Closest substitutes for Apricot kernel oil
Out of Apricot kernel oil? These oils behave most like it in a bar — ranked by how close their hardness, cleansing and conditioning profile and lye (SAP) requirement are. The numbers are predicted properties for a 100% single-oil bar, not a safety guide; always recalculate the lye when you swap an oil.
| Oil | Hardness | Cleansing | Conditioning | SAP (NaOH) |
|---|---|---|---|---|
| Apricot kernel oil (this oil) | 5 | 0 | 90 | 0.135 |
| Flaxseed / linseed oil | 5 | 0 | 89 | 0.135 |
| Kukui nut oil | 6 | 0 | 90 | 0.135 |
| Hazelnut oil | 5 | 0 | 88 | 0.135 |
| Pomegranate seed oil | 8 | 0 | 91 | 0.135 |
Using Apricot kernel oil in a recipe
One gram of Apricot kernel oil needs about 0.135 g of NaOH (sodium hydroxide) to turn fully to soap, within a documented range of 0.128–0.143 g/g across sources. The calculator below uses this value; always confirm the lye weight before you mix.
Its iodine value is about 101 — a higher value, pointing to a softer, more conditioning bar that is more prone to rancidity (DOS). Iodine value is only a rough guide, not a hard rule, but it gives you a feel for how a bar built around this oil will wear.
Most soapers use Apricot kernel oil at roughly 5–12% of their oils.
Maker's note: Medium conditioning lather; olive-oil substitute.
Calculate lye for Apricot kernel oil
The calculator below is pre-loaded with Apricot kernel oil. Enter your weights, add other oils, and it works out the exact NaOH (lye) weight, water and quality numbers. Always weigh lye, oils and water — never measure by volume, wear gloves and eye protection, and add lye to water (never the reverse).
Loading the calculator…
Where these numbers come from
Every figure on this page is backed by at least two independent references, listed below — so you can check our work instead of taking our word for it.
- SoapCalc oil list — SAP, iodine
- From Nature With Love — Saponification Chart — SAP range
SAP data last updated · 51 oils covered.
Apricot kernel oil soap FAQ
- Can you make soap with 100% Apricot kernel oil?
- It is not recommended. Apricot kernel oil shows its best in a blend, usually up to about 12% of the oils. On its own the bar would be unbalanced — too soft or low-lathering for everyday use.
- What superfat should I use with Apricot kernel oil?
- A 5% superfat is a safe, common starting point for recipes using Apricot kernel oil; adjust to taste once you know how the finished bar feels. Never drop to 0% or below without a deliberate reason — the calculator will ask you to confirm it.
- Does Apricot kernel oil speed up or slow down trace?
- High-oleic Apricot kernel oil traces slowly, which gives you comfortable working time for swirls and layers. In exchange the bar is soft at first and rewards a longer cure — four to eight weeks — to harden fully and last in the shower.